Products
Solutions
News
0102030405
How to set up a wireless network using Powerline Wi-Fi Kit by Pair button
2024-10-11
User’s Application Scenario:
I have a wireless router in my house, but the wireless signal cannot reach every corner. So I bought a Powerline Wi- Fi Kit to extend the wireless network. The Powerline Wi-Fi Kit includes a Powerline Adapter and a powerline extender.
How can I do that?
Follow the steps below.
Note: powerline adapter WD-T1202MH+WD-F1202MH-T is used for demonstration in this article.
Step 1
Connect the powerline adapter to an available LAN port of the host router. Plug the powerline adapter into a wall socket. Plug the powerline extender into a wall socket near the adapter.
Step 2
Pair the powerline devices.
a. Press the Pair button of the powerline adapter for 1-3second. The Power LED starts blinking.
Note: If the Power LED does not blink, press it again.
b. Within two minutes, press the Pair button of the powerline extender for 1-3 second. The Power LED starts blinking. When the Powerline LED stays on, the pairing process is done!
Step 3
Find the Wi-Fi Info in the back sticker, and then relocate the powerline extender to a new location. Connect to the Wi-Fi using the SSID and password on the card