PLC access control network converter
WD-ACS1001M

Host technical parameters
◆ Supports the G.hn standard
◆ DIN rail mounting
◆ Rate adaptive
◆ Transmission line: three-wire transmission (L N G)
◆ The maximum bandwidth : 200Mbps
◆ Size:123*97*47mm(L×W×H)
◆ Voltage range:AC85-265V
◆ Interface :1*10/100/1000Base-TX adaptive RJ45 port,1*AC power port
◆ Indicator display: Ethernet PLC link Power
◆ Weight: About 0.25kg
◆ One Master engine load (extension) 63 units
◆ The line distance is recommended to be the maximum distance of 2000 meters, and the distance between the extension is recommended to be within 300 meters
◆ Transmission wire diameter is recommended :0.75MM X3 or above, the line is exclusively for the access control system, do not install other loads
◆ Accessories :204 Filter (In order to protect the power line for access control from harmonic interference in the power environment, an Filter is recommended)
◆ Operating temperature: -40℃-80℃
◆ Operating environment : Operating humidity:10%-85% (no condense)
Storage humidity: 5%-90%(no condense)
◆ Design criteria: IEC 60529 IEC 50022 IEC 60068-2-6 G.hn
WD-ACS1001S

Extension technical parameters
Product features
Installation mode

System architecture diagram
