Leave Your Message
Products Categories
Featured Products

WD-1201M-DIN(V3)

DIN rail mounting industrial powerline ethernet bridge is an industrial power line communication product developed by Kunshan Wondertek Technology Co., LTD. The product supports the HomeplugAV2 communication protocol standard. At present, it has been widely used in railway, mining, industrial communication, airport, subway, coal mine, intelligent storage, industrial automation control, automatic garage and other wired or sliding contact line and many other sites.

    description1

    PRODUCT Features

    ● Support HomeplugAV2 Protocol standard
    ● Industrial DIN rail style installation
    ● The maximum transfer distance up to 500 meters
    ● Self-adapt the rate
    ● Quality of Service (QoS)
    ● IGMO (IPv4) Snooping & MLD (IPv6) Snooping
    ● Working temperature: -40℃-80℃
    ● Operating humidity: 10%-85% no condense
    ● Storage humidity:5%-90% no condense
    ● Packet loss:≤0.1%(100M,load 70%)
    ● Support 7*24 hours all weather operation
    ● Hardware watch dog function
    ● PING≤20MS

    description1

    PRODUCT parameters

    Model

    WD-1201M-DIN(V3)

    Interface

    1*LAN
    10/100/1000Base-TX self
    adaption RJ45,1*AC power
    interface

    LED display light

    Ethernet, PLC ,Power

    Transfer frequency

    2-68MHz MIMO

    Protocol (PHY)

    IEEE802.3 , IEEE802.3x, IEEE802.3u HomeplugAV2

    Security

    128-AES

    Number of each group

    Up to 63

    installation

    Rail TS35

    Protection level

    IP40

    Modulation

    OFDM

    Effective transfer rate

    TCP/IP 500Mbps

    Manageability

    802.1D Ethernet Bridge
    Quality of Service(QoS)
    IGMO (IPv4) Snooping & MLD
    (IPv6) Snooping

    Voltage range

    AC 90V-530V 50/60Hz
    /DC100-700V /80mA

    Operating temperature

    -40℃-85℃

    Size

    123*97*47(mm)(L×W×H)

    Weight

    0.25kg

    Operating environment

    Operating
    humidity:10%-85%(no
    condense)
    Storage humidity: 5%-90%(no
    condense)

    Certification

    FCC, CE class B, RoHS

    All specifications are subject to change without prior notice

    description1

    Anti-interference

    Immunity of ESD
    The testing voltage which the device should be
    beared: ±6kV direct Discharge, ±8kV air discharge. Discharge number in Each sensitive testing point:
    Plus-n-Minus 10 times each, Every time the discharge
    interval is 1 s, according to B/T 17626.2-2006.
     Immunity of electrical fast transient impulse group
    (Common mode)
    The testing voltage which the device should be beared:
    between the power supply voltage port and ground:
    ±2.0kV;
    between signal circuit and ground: ±1.0kV;
    repetition frequency: 5KHz, test duration: 1 min/ time;
    testing times: Plus-n-Minus 5 times each. According to
    GB/T 17626.4-2008.
    Anti interference of surge impact
    The testing voltage which the device should be
    beared: ±2kV;
    The interval of continuous impulses: 1min/time;
    Test number: Plus-n-Minus 5 times each. According
    to GB/T 17626.5-2008.(protection: all models
    protection and varistor series of
    discharge tube type).
    6535d07dqa
    6535d0aznm